TURBO HD HIKVISION VIDEO SNIMAČ 16 kanalni DS-7216HGHI serije +2IP kamere

Key features:

• 1080p recording resolution at 12 fps, 720p and lower resolutions at 25 fps
• Support for 16 HD-TVI or CVBS cameras and 2 IP cameras (Hikvision, max. 1080p)
• Support for IE, Google Chrome, Opera, Safari
• Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth
• Parallel operation of HDMI, VGA and CVBS outputs
• HDMI/ VGA modes up to 1920 x 1080 pixels
• Searching recordings by alarm events
• VCA image analysis function
• Digital zooming during live monitoring and playback
• Synchronous playback from 8 channels
• Support for IPv4, IPv6,
• Monitoring the statuses of LAN, cameras, hard drives

Hikvision DS-7216HGHI is a 16-channel hybrid CCTV DVR capable of recording surveillance video provided in HD-TVI, CVBS and IP standards. The maximum recording resolution is 1080p@12fps. In the case of 720p / VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.

High Definition Transport Video Interface (HD-TVI) is a revolutionary technology that allows users to send uncompressed, high-resolution video (up to 1080p) over coaxial or twisted-pair cables (using dedicated baluns). The transmitted video signal is in analog form, with bandwidth much greater than in the case of CVBS (SD). As the signal is not compressed, the picture is more natural during live viewing. There is no delay and the configuration of such a system is easier compared to IP CCTV solutions.

The menu of the DVR has been designed in a manner that helps everyone, even novice users, navigate and make changes to the settings. Both the layout of commonly used functions and graphic design meet the highest current standards. Support for Google Chrome, Opera and Safari web browsers eliminates the need for installing/using ActiveX controls.

The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.

Each channel has the possibility of independent settings for intelligent image analysis. The image analysis includes detection of virtual boundary line trespass (including direction), and detection of intrusion to an area of a square shape. The image quality diagnostic function can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.

The DVR can operate in IP networks (TCP/IP or PPPoE protocols), connected via its RJ-45 port. It supports the following protocols and network services: DHCP, SNMP, FTP, SMTP, E-Mail, NTP, DNS, DDNS, UPnP.
The communication can be performed via popular Internet browsers (IE, Google Chrome, Opera, Safari) or free client software (iVMS 4200 for PCs, iVMS 4500 for smartphones).

The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.

View of the control panel of the iVMS-4200 application

iVMS-4500 is a mobile application for smartphones running Android, iOS or Windows Phone operating systems. It can be used for live monitoring and playback of images from DVRs, NVRs, IP cameras via Wi-Fi, 2G or 3G networks.

Name/model		DS-7216HGHI
Code		M75216
Main video format		HD-TVI
Video inputs		BNC x 16
Video outputs		HDMI, VGA
HDMI/VGA resolutions		1080p: 1920x1080 SXGA: 1280x1024 720p: 1280x720 XGA 1024x768
Audio input / output conn.		RCA 4 / 1
Alarm inputs / outputs		16 / 4
Alarms and exceptions		Motion detection, video loss, camera tampering
Live monitoring		25 fps
Recording options	1080p	12 fps
	720p	25 fps
	VGA	25 fps
	WD1/4CIF	25 fps
	CIF	25 fps
Video bit rate range (single channel)		32 kbps - 3072 kbps
Audio bit rate		64 kbps
HDD capacity & interface		2 x max 4 TB SATA HDD,
NAS/SAN compatibility		YES (NAS)
External ports		2x USB 2.0; RS-485; RJ-45
Auxiliary stream		CIF/QCIF
Network protocols		TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP
Software ports		Server - 8000 HTTP - 80 RTSP - 554
Remote monitoring		Internet Explorer; after installing plugins - Google Chrome. Firefox. Safari;  smartphones (Android. Windows Mobile)
PTZ protocols		Yes
Archiving		USB storage device
Power input		12 VDC / 2 A (dedicated PSU)
Power consumption		<20 W
Operating temperature		-10°C...55°C
Operating humidity		10%...90%
Dimensions ( W x D x H )		380 x 290 x 48 mm